Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-417
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
NPV Messages
NPV-3
Error Message NPV-3-ACL_UPDATE_FAILED: [chars]
Explanation ACL update request initiated by the NPV process has failed.
Recommended Action No action is required.
Error Message NPV-3-CFS_INVALID_PAYLOAD_RECEIVED: NPV received invalid payload from
CFS
Explanation NPV process received invalid payload from CFS.
Recommended Action No action is required.
Error Message NPV-3-CLEAR_FAILED: [chars]
Explanation An error has occurred while clearing the lock. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message NPV-3-COMMIT_FAILED: [chars]
Explanation An error has occurred while committing configuration. The reason for the failure :
[chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message NPV-3-COMMIT_PARTIALLY_FAILED: [chars]
Explanation An error has occurred while committing configuration. Configuration could not be
committed on some switches. The reason for the failure : [chars]. Configuration can be inconsistent
in the fabric.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message NPV-3-COMMIT_REJECTED: [chars]
Explanation Commit request received from remote switch is rejected. The reason for the failure:
[chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English