Send document comments to nexus7k-feedback-doc@cisco.com
2-27
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ARP Messages
Error Message AM-5-MTS_OPC_UNK Format: Received unknown MTS opcode %lu
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
Error Message AM-5-REG_DELAY Format: AM register %s delay: %d seconds
Explanation An unexpected but recoverable error has occurred.
Recommended Action No action is required.
AM-6
Error Message AM-6-FAILED_STATS Format: Failed to retrieve stats from FTM
Explanation This message indicates an informational log about a system event.
Recommended Action No action is required.
Error Message AM-6-SYSMAN_CLEANUP Format: Terminated by SYSMAN cleanup signal ;
Explanation: Informational log about a system event.
Explanation The system has detected an error.
Recommended Action No action is required.
ARP Messages
This section contains the ARP messages.
ARP-2
Error Message ARP-2-AM_PIB Format: Failed to acquire AM handle %s
Explanation An unrecoverable software error has occurred during ARP initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message ARP-2-AM_REG Format: Failed to register as a client of AM %s
Explanation An unrecoverable software error has occurred during ARP initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.