Send document comments to nexus7k-feedback-doc@cisco.com
2-187
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FCC_LC Messages
Error Message FCC-5-RATE_LIMIT_START_NOTIF: Received Rate Limit Start notification
Explanation FCC has received a Rate Limit Start Notification.
Recommended Action No action is required.
Error Message FCC-5-STARTING: FCC process started
Explanation Process started successfully.
Recommended Action No action is required.
FCC-6
Error Message FCC-6-PRIO_UPDATE: Updated enable priority to [dec]
Explanation FCC is active for packets with priority <= [threshold].
Recommended Action No action is required.
FCC_LC Messages
This section contains the FCC_LC messages.
FCC_LC-2
Error Message FCC_LC-2-ERROR_SENDING_HEART_BEAT: Error sending heart beat [dec]
Explanation FCC_LC has error sending heartbeat.
Recommended Action No action is required.
Error Message FCC_LC-2-EXITING: Exiting fcc_lc: [chars]
Explanation FCC_LC exiting.
Recommended Action No action is required.
Error Message FCC_LC-2-HEART_BEAT_NOT_SENT: Heart beat not sent for [dec] millisecs
Explanation FCC_LC has not sent heartbeat.
Recommended Action No action is required.
To Next Page
Loading...
