Cisco AP775A - Nexus Converged Network Switch 5010

Send document comments to nexus7k-feedback-doc@cisco.com
2-824
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
XBAR Messages
XBAR-5
Error Message XBAR-5-ARB_CLEAR_PORT_FAIL: Arbiter reported failure to de-register
port [dec] in group [dec] return_code [hex] ([chars]).
Explanation The supervisor has experienced an arbiter setup failure .
Recommended Action No action is required.
Error Message XBAR-5-ARB_INIT_MOD_DIS_INTR_FAIL: Arbiter reported failure to
disable interrupt for module [dec] return_code [hex] ([chars]).
Explanation The supervisor has experienced an arbiter setup failure .
Recommended Action No action is required.
Error Message XBAR-5-ARB_INIT_MOD_INSERT_CHECK_FAIL: Arbiter reported failure to
recognize module [dec] return_code [hex] ([chars]).
Explanation The supervisor has experienced an arbiter setup failure .
Recommended Action No action is required.
Error Message XBAR-5-ARB_INIT_MOD_INSERT_FAIL: Arbiter reported failure to init
module [dec] return_code [hex] ([chars]).
Explanation The supervisor has experienced an arbiter setup failure .
Recommended Action No action is required.
Error Message XBAR-5-ARB_INIT_MOD_INTR_FAIL: Arbiter reported failure to enable
interrupt for module [dec] return_code [hex] ([chars]).
Explanation The supervisor has experienced an arbiter setup failure .
Recommended Action No action is required.
Error Message XBAR-5-ARB_INIT_MOD_REMOVE_FAIL: Arbiter reported failure to remove
module [dec] return_code [hex] ([chars]).
Explanation The supervisor has experienced an arbiter setup failure .
Recommended Action No action is required.