Send document comments to nexus7k-feedback-doc@cisco.com
2-345
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
KSINK Messages
Error Message IVR-6-DRAV_TOPO_UPDATE: [chars]
Explanation DRAV FSM Topology has been updated as indicated by [chars].
Recommended Action No action is required.
Error Message IVR-6-LICENSE_VALID: A valid license for Inter-VSAN Routing has been
obtained
Explanation A valid license for Inter-VSAN Routing has been obtained.
Recommended Action No action is required.
IVR-7
Error Message IVR-7-CFS_REQ_RCVD: [chars]
Explanation CFS request is received. The WWN of the switch originated this request and the
rr-token of the request are provided in the syslog message.
Recommended Action No action is required.
Error Message IVR-7-CFS_RESP_SENT: [chars]
Explanation CFS response is sent. The rr-token of the corresponding request and the status are
provided in the syslog message.
Recommended Action No action is required.
KSINK Messages
This section contains the KSINK messages.
KSINK-3
Error Message KSINK-3-API_FAILED Format: %s - failed in %s()
Explanation ksink called an API that has failed
Parameters: Failed Operation, ksink Function ...
Recommended Action No action is required.