Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-566
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
RIB Messages
Error Message RIB-3-SEND_SNMP: Cannot respond to snmp
Explanation RIB to snmp IPC failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message RIB-3-SEND_STANDBY: Cannot talk to standby rib
Explanation Lost a RIB-fib transaction log due to IPC failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
RIB-4
Error Message RIB-4-CPU_HOG: Inactive or busy
Explanation Either RIB was not scheduled to run, or RIB was busy, and RIB did not service the
message or timer queue for an extended period.
Recommended Action Enter 'debug RIB error', then recreate the operation scenario, to find out more
details.
Error Message RIB-4-DUP_FIB: Duplicate response from fib
Explanation RIB igored duplicate response from fib.
Recommended Action Enter 'debug RIB error', then recreate the operation scenario, to find out more
details.
Error Message RIB-4-LATE_FIB: Late response from fib
Explanation RIB igored late response from fib.
Recommended Action Enter 'debug RIB error', then recreate the operation scenario, to find out more
details.
Error Message RIB-4-PC_LIMIT: PC number greater than 128 (ignored by RIB)
Explanation RIB igored pc > 128 for multicast.
Recommended Action Please use PC number < 128.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English