Send document comments to nexus7k-feedback-doc@cisco.com
2-137
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
EIGRP Messages
Error Message EIGRP-2-CIB_CREATE_FAIL Format: eigrp_create_cib failed for context
%s
Explanation Failed to create specified context.
Parameters: Context name ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-2-CLEANUP_DREG Format: Failed to deregister with %s during
eigrp_cleanup()
Explanation Failed to deregister with specified service during process shutdown.
Parameters: Service name ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-2-CLI_INIT_FAILED Format: cli_init() failed in eigrp_init_cli()
Explanation EIGRP could not register with the CLI server process.
Recommended Action Restart the component when the system is working.
Error Message EIGRP-2-ERR_FREEBUF Format: Illegal memory free in function %s
Explanation Illegal memory free detected.
Parameters: Function ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-2-ERR_URIB_TID Format: Can't determine context from URIB table
id %ld
Explanation Failed to determine context from URIB table id.
Parameters: Table id ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
To Next Page
Loading...
Need help?
General
