Send document comments to nexus7k-feedback-doc@cisco.com
2-138
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
EIGRP Messages
Error Message EIGRP-2-ILL_FUNCCALL Format: Illegal call to function %s
Explanation Illegal call to specified function.
Parameters: Function ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-2-ILL_POLICY_TYPE Format: Illegal policy type in %s()
Explanation Illegal policy type in specified rpm callback.
Parameters: Function ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-2-ILL_WORKTYPE Format: Illegal work type %d
ipigrp2_process_workq()
Explanation Worker thread received illegal work type.
Parameters: Work type ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-2-ILLEGAL_TIMER_ID Format: Illegal timer-id used in
mgd_timer_init_leaf(), timer-id: %d
Explanation Illegal timer id was specified.
Parameters: Managed timer id ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-2-IM_REG_FAILED Format: im_register_client() failed in
eigrp_init_im()
Explanation EIGRP could not register with the IM process.
Recommended Action Restart the component when the system is working.
To Next Page
Loading...
Need help?
General
