Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-133
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
DPVM Messages
DPVM-3
Error Message DPVM-3-DB_ERR: [chars]
Explanation An error has occurred during an DPVM database operation. [chars] indicates the reason
for the error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message DPVM-3-DDAS_MODE_INVALID: [chars]
Explanation DDAS mode Invalid. [chars].
Recommended Action Flip DDAS mode.
Error Message DPVM-3-INIT_FAIL: [chars]
Explanation An error has occurred during DPVM Initialization. [chars] indicates the reason for
failure.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message DPVM-3-MTS_ERR: [chars]
Explanation An error has occurred in processing of an MTS message. [chars] indicates the error that
occurred.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message DPVM-3-PSS_ERR: [chars]
Explanation An error has occurred during an DPVM PSS operation. [chars] indicates the PSS
operation that caused the error.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
DPVM-4
Error Message DPVM-4-ACTIVATION_FAIL: [chars]
Explanation Activation of DPVM device mappings failed due to [chars].
Recommended Action Correct the error and reactivate database again.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English