Send document comments to nexus7k-feedback-doc@cisco.com
2-843
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ZONE Messages
Error Message ZONE-4-ZS_FC2_OPER_FAILED: FC2 [chars] operation failed : [chars]
Explanation Zone Server FC2 [chars] operation failed : [chars].
Recommended Action No action is required.
Error Message ZONE-4-ZS_IF_PORT_MODE_CONFLICT: Port mode conflict for if [chars]
Explanation Port mode conflict for if [chars].
Recommended Action Shutdown/no shutdown the interface.
Error Message ZONE-4-ZS_INVALID_FPORT_WWN_MEMBER: Virtual device fwwn: [chars] is
not a valid zone/alias member virtual name: [chars] pwwn: [chars]
Explanation Virtual device fwwn: [chars] is not a valid zone/alias member, virtual name: [chars]
pwwn: [chars].
Recommended Action No action is required.
Error Message ZONE-4-ZS_LC_UPGRADE_CHANGE_IN_PROGRESS: Linecard upgrade request is
received when change protocol is in progress
Explanation A request for line card upgrade has been received when change protocol is in progress.
The line card upgrade will occur after the completion of the change protocol.
Recommended Action No action is required.
Error Message ZONE-4-ZS_LICENSE_EXPIRY_WARNING: Feature [chars] evaluation license
[chars] expiry in [dec] days
Explanation Feature [chars1] will exceed its evaluation time period in [dec] days and will be shut
down unless a permanent license [chars2] was installed.
Recommended Action Install the license file to continue using the feature.
Error Message ZONE-4-ZS_MEMBER_CONVERSION_FAILED: Zone Member conversion failed for
[chars]. Error: [chars]
Explanation Zone Member conversion has failed in : [chars] due to error: [chars].
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General
