Send document comments to nexus7k-feedback-doc@cisco.com
2-594
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SECURITYD Messages
Error Message SECURITYD-2-FIPS_IMAGE_INTEGRITY_SELF_TEST_STATUS: FIPS Image
Integrity self-test status : [chars]
Explanation Status of FIPS [chars] self-test [chars].
Recommended Action No action is required.
Error Message SECURITYD-2-FIPS_POWERUP_SELF_TEST_STATUS: FIPS [chars] power-up
self-test status : [chars]
Explanation Status of FIPS [chars] power-up self-test [chars].
Recommended Action No action is required.
Error Message SECURITYD-2-FIPS_POWERUP_SELF_TESTS_STATUS: FIPS power-up self-test
status: [chars]
Explanation Status FIPS self-test [chars].
Recommended Action No action is required.
Error Message SECURITYD-2-FIPS_SELF_TEST_FAILED: FIPS self-test failure : [chars]
: [chars]
Explanation FIPS self-test failed [chars] for service [chars].
Recommended Action No action is required.
Error Message SECURITYD-2-PROGRAM_EXIT: security/accounting daemon exiting: [chars]
Explanation Security/accounting daemon is exiting.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
SECURITYD-3
Error Message SECURITYD-3-NVRAMFAILURE: nvram failure
Explanation The system has detected that because the NVRAM cannot be read/written to, the
accounting log cannot be stored in NVRAM.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.