Cisco AP775A - Nexus Converged Network Switch 5010 - SENSOR_USD Messages; Sensor_Usd-2; Securityd-3

Send document comments to nexus7k-feedback-doc@cisco.com
2-595
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SENSOR_USD Messages
SECURITYD-6
Error Message SECURITYD-6-ACCOUNTING_MESSAGE: [chars]
Explanation This message indicates that this is an accounting message.
Recommended Action No action is required.
Error Message SECURITYD-6-CHANGE_PASSWD: changing passwd for [chars]
Explanation Changing passwd for [chars].
Recommended Action No action is required.
Error Message SECURITYD-6-DELETE_STALE_USER_ACCOUNT: deleting expired user
account:[chars]
Explanation Deleting expired user account of [chars].
Recommended Action No action is required.
Error Message SECURITYD-6-FIPS_MODE_SET: FIPS mode is [chars] for service [chars]
Explanation FIPS mode is changed [chars] [chars].
Recommended Action No action is required.
Error Message SECURITYD-6-FIPS_MODE_SET_FAILED: Error when setting FIPS mode :
[chars]
Explanation FIPS mode failed [chars].
Recommended Action No action is required.
SENSOR_USD Messages
This section contains the SENSOR_USD messages.
SENSOR_USD-2
Error Message SENSOR_USD-2-SNSM_SYSLOG_INIT_FAILED: Sensor Mgr Initialization
failed. Component [chars]
Explanation Sensor Manager syslog message.
Recommended Action No action is required.