Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-716
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSTEMHEALTH Messages
Error Message SYSMGR-7-UNKNOWNADDR: Opcode [dec] received from unknown source
[chars]. Discarding.
Explanation This message is for Cisco TAC debugging. This is not a problem or malfunction.
Recommended Action No action is required.
Error Message SYSMGR-7-UNKNOWNMSG: Unknown opcode [dec] received from [chars].
Explanation The The system Manager has received an unrecognized message with the specified
opcode. [chars] is the source of the message. This message is for debugging purposes only.
Recommended Action No action is required.
Error Message SYSMGR-7-UNKNOWNPID: Opcode [dec] received from [chars] with unknown
PID [dec]. Discarding.
Explanation The The system Manager has received a message from an unknown process. [chars] is
the source of the message. This message is for debugging purposes only.
Recommended Action No action is required.
Error Message SYSMGR-7-UNKNOWNUUID: Opcode [dec] received from [chars] with unknown
UUID [dec]. Discarding.
Explanation The The system Manager has received an unrecognized message from the specified
UUID. [chars] is the source of the message. This message is for debugging purposes only.
Recommended Action No action is required.
SYSTEMHEALTH Messages
This section contains the SYSTEMHEALTH messages.
SYSTEMHEALTH-2
Error Message SYSTEMHEALTH-2-OHMS_BATTERY_FAILED: Battery [dec] failed for module
[dec]. Reason: [chars].
Explanation Battery failed.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English