Send document comments to nexus7k-feedback-doc@cisco.com
2-729
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSWRAP_LIB Messages
Error Message SYSTEMHEALTH-6-OHMS_INBAND_TX_CONGESTION: Inband Unable to transmit
due to TX path congestion on module [dec].
Explanation The system Health Inband TX congestion.
Recommended Action No action is required.
Error Message SYSTEMHEALTH-6-OHMS_NVRAM_CLEARED: Failing conditions for Nvram on
module [dec] have been cleared.
Explanation The system Health Nvram failures cleared.
Recommended Action No action is required.
Error Message SYSTEMHEALTH-6-OHMS_STARTED: Online System Health started.
Explanation Online The system Health started.
Recommended Action No action is required.
SYSWRAP_LIB Messages
This section contains the SYSWRAP_LIB messages.
SYSWRAP_LIB-2
Error Message SYSWRAP_LIB-2-SYSWRAP_ERR Format: Error condition in stack: %s
tid=%lu: %#x bytes left on stack of %#lx bytes
Explanation An error has occurred in a call to the syswrap library.
Recommended Action No action is required.
TACACS Messages
This section contains the TACACS messages.
TACACS-2
Error Message TACACS-2-TACACS_PROGRAM_EXIT: TACACS+ daemon exiting: [chars]
Explanation TACACS+ daemon is exiting.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
