Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-22
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
AM Messages
Error Message AM-2-SVR_REG Format: Failed to register as a client of %s for VRF %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-SYSMGR_NAME Format: Failed to get name from sysmgr during %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-SYSMGR_NOTIFY Format: Bad notification from sysmgr for %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-SYSMGR_QUERY Format: Failed to query sysmgr for %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-SYSMGR_UUID Format: Failed to get uuid from sysmgr during %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-THR_CREAT Format: Failed to create thread %s: error %d
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-THREAD_FAIL Format: Failed to start %s thread
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English