Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-21
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
AM Messages
Error Message AM-2-REQD_COMP_FAIL Format: Required component \%s\ has failed to
initialize.
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-SDB_CREAT Format: Failed to create shared database
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-SDB_DESTROY Format: Failed to destroy shared database
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-SDB_OPEN Format: Failed to open shared database
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-SET_SCHED Format: Failed to set policy or priority
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-SHM_CREAT Format: Failed to create shared memory: %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message AM-2-SHM_LOCK_CREAT Format: Failed to create shared memory lock: %s
Explanation An unrecoverable software error has occurred during the AM initialization.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English