Send document comments to nexus7k-feedback-doc@cisco.com
2-252
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IGMP Messages
Error Message IGMP-3-INVALID_OIF_LIST Format: IGMP Snooping invalid OIF list %s with
%d iods in %s
Explanation IGMP-SNOOP has invalid number of iods.
Parameters: OIF list, OIF count, Function name ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IGMP-3-LIB_API_FAILED Format: %s failed in %s
Explanation Process failed in invoking IGMP API.
Parameters: API name, Function name ...
Recommended Action No action is required.
Error Message IGMP-3-LIB_MTS_FAILED Format: %s failed in %s, errno: %s
Explanation Process failed to access the IGMP MTS-queue.
Parameters: MTS IPC operation, Function name, Error ID ...
Recommended Action No action is required.
Error Message IGMP-3-LVPORT_CREATE Format: IGMP Snooping couldn't create an
leave-port in %s for group %s
Explanation IGMP-SNOOP called an API which returned an error.
Parameters: Vlan ID, Group address ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IGMP-3-MALLOC_FAILED Format: %s failed in %s
Explanation IGMP process is out of free memory.
Parameters: Structure type, Function name ...
Recommended Action Configure the network or router to decrease the number of routes.
Error Message IGMP-3-MFDM_NO_BUF Format: Cannot find MFDM buffer from route-ack for
xid 0x%x
Explanation IGMP process could not find a route buffer in its queue from the MFDM message,
igored.
Recommended Action No action is required.