Send document comments to nexus7k-feedback-doc@cisco.com
2-253
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IGMP Messages
Error Message IGMP-3-MTS_BIND Format: Error returned from mts_bind() for %s mts-q,
errno: %s
Explanation IGMP called an MTS API which returned an error.
Parameters: MTS Queue name, Error description ...
Recommended Action Dump core, and and and then restart component.
Error Message IGMP-3-MTS_DROP Format: Error returned from mts_drop() for %s queue,
errno: %s
Explanation IGMP called an MTS API which returned an error.
Parameters: MTS Queue name, Error description ...
Recommended Action Dump core, and and and then restart component.
Error Message IGMP-3-MTS_RECV Format: Error returned from mts_recv() for %s queue,
errno: %s
Explanation IGMP called an MTS API which returned an error.
Parameters: MTS Queue name, Error description ...
Recommended Action Dump core, and and and then restart component.
Error Message IGMP-3-MTS_SEND Format: Error returned from mts_send() for %s queue,
errno: %s
Explanation IGMP called an MTS API which returned an error.
Parameters: MTS Queue name, Error description ...
Recommended Action Dump core, and and and then restart component.
Error Message IGMP-3-MUTEX_INIT Format: Couldn't init mutex %s
Explanation IGMP process failed to initialize the mutex system resource.
Parameters: Thread Name ...
Recommended Action Dump core, and then restart component.
Error Message IGMP-3-NO_SET_PRIORITY Format: Failed to set policy or priority
Explanation IGMP process could not set itself process priority, exiting.
Recommended Action No action is required.
To Next Page
Loading...
