Send document comments to nexus7k-feedback-doc@cisco.com
2-254
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IGMP Messages
Error Message IGMP-3-NO_SHUTDOWN Format: Unable to shutdown %s
Explanation IGMP process unable to shut itself down.
Parameters: Shutdown error information ...
Recommended Action Dump core, and and and then restart component.
Error Message IGMP-3-PT_ADD Format: Couldn't add element to PT %s
Explanation IGMP failed to update the local snooping-db entry.
Parameters: Patricia tree name ...
Recommended Action No action is required.
Error Message IGMP-3-PT_DEL Format: Couldn't delete element from PT %s
Explanation IGMP failed to delete the local snooping-db entry.
Parameters: Patricia tree name ...
Recommended Action No action is required.
Error Message IGMP-3-PTHREAD_FAILED Format: %s failed in %s for thread %s
Explanation IGMP process failed to create a task thread.
Parameters: Pthread operation, Function name, Thread name ...
Recommended Action Dump core, and and and then restart component.
Error Message IGMP-3-PULLUP_FAILED Format: m_pullup() of %d bytes failed in %s
Explanation IGMP process failed to process the packet, dropping it.
Parameters: Byte count, Function name ...
Recommended Action No action is required.
Error Message IGMP-3-QUERIER_START_FAILED Format: %s failed in %s
Explanation IGMP snoop failed to start the querier.
Parameters: Function name, Function name ...
Recommended Action No action is required.
Error Message IGMP-3-RCOUNT_DELETE Format: Route count delete failed for %s
Explanation IGMP called an API which returned an error.
Parameters: Interface ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
Need help?
General
