Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-255
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IGMP Messages
Error Message IGMP-3-RCOUNT_UPDATE Format: Route count update failed for %s
Explanation IGMP called an API which returned an error.
Parameters: Interface ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IGMP-3-RESERVE_LIMIT Format: Exceeded reserve-limit for interface %s
- dropping
Explanation Exceeded the reserve-limit for the interface
Parameters: Interface ...
Recommended Action No action is required.
Error Message IGMP-3-RESTART_REASON Format: IGMP process has restarted, restart
reason: %s\n
Explanation IGMP is restoring the routes it had added in previous instance.
Parameters: Restart reason ...
Recommended Action No action is required.
Error Message IGMP-3-RPORT_UPDATE Format: Router-port update failed for %s (%s)
Explanation IGMP-SNOOP called an API which returned an error.
Parameters: Interface, Vlan ID ...
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IGMP-3-SETRLIMIT_FAILED Format: Address space size increment of %ld
failed, reason %s
Explanation IGMP process could not set a memory resource limit
Parameters: Number of bytes ...
Recommended Action No action is required.
Error Message IGMP-3-STATE_LIMIT Format: Exceeded state-limit for interface %s -
dropping
Explanation Exceeded the state-limit for the interface
Parameters: Interface ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English