Send document comments to nexus7k-feedback-doc@cisco.com
2-733
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
TCP Messages
Error Message TCP-2-MGETHDR Format: %s: MGETHDR failed, error %s
Explanation No system resources.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message TCP-2-MISMATCH_LEN Format: %s: Mismatch in mbuf len (%d) and IP len
(%d)
Explanation Mismatch in mbuf len and IP len.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message TCP-2-MPREPEND Format: %s: m_prepend failed for connection, L: %s.%d,
F: %s.%d, error %s
Explanation No system resources.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message TCP-2-MPULLUP Format: %s: m_pullup failed for %s, error %s
Explanation No system resources.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message TCP-2-MTS_BIND Format: %s: Unable to bind to %s mts queue: %s
Explanation TCP called an MTS API which returned an error.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message TCP-2-MUTEX_DESTROY Format: %s: pthread_mutex_destroy failed, error
%s
Explanation No system resources.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message TCP-2-MUTEX_INIT Format: %s: pthread_mutex_init failed, error %s
Explanation No system resources.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
To Next Page
Loading...
Need help?
General
