Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-357
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
L3VM Messages
L3VM-2
Error Message L3VM-2-STARTUP_FAILURE Format: Startup failure: failed to %s in %s()
Explanation An unrecoverable software error has occurred during l3vm startup.
Parameters: Startup Operation, L3vm Function ...
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message L3VM-2-TIB_ID_RAVL Format: %s failed with table id 0x%08x in %s()
Explanation L3vm called an AVL API that has failed
Parameters: Failed Operation, Table Id, L3vm Function ...
Recommended Action No action is required.
L3VM-3
Error Message L3VM-3-API_FAILED Format: %s - failed in %s()
Explanation L3vm called an API that has failed
Parameters: Failed Operation, L3vm Function ...
Recommended Action No action is required.
Error Message L3VM-3-ASSERT_ERROR Format: %s:%d: Assertion \%s\ failed.
Explanation The system has detected an error.
Parameters: Filename, Line number, Test ...
Recommended Action No action is required.
Error Message L3VM-3-CONTEXT Format: Cannot find %s context in %s()
Explanation Cannot find a given context in the system
Parameters: L3vm context, L3vm Function ...
Recommended Action No action is required.
Error Message L3VM-3-IM Format: Error returned from %s, errno: 0x%08x (%s) in %s()
Explanation L3VM called a IM API which returned an error.
Parameters: Failed API, Error Code, Error Description, L3vm Function ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English