Send document comments to nexus7k-feedback-doc@cisco.com
2-216
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FDMI Messages
FDMI-2
Error Message FDMI-2-MTS_ERROR: MTS message transmission failed with error [dec]
Explanation FDMI process unsuccessfully tried to send an MTS message. MTS error number is
specified in [dec].
Recommended Action No action is required.
Error Message FDMI-2-PSS_CFG_RESTORE_ERROR: Configuration restoration for [chars]
failed with error [hex] for key type [dec]
Explanation FDMI read the saved configuration and has detected an error while rebuilding the
runtime configuration. [chars] describes the configuration which the process tried to restore and
0x[hex] is the system err code.
Recommended Action No action is required.
Error Message FDMI-2-PSS_RTDB_RESTORE_ERROR: Runtime database restoration for
[chars] failed with error [hex]
Explanation FDMI read the saved runtime database and has detected an error while rebuilding the
runtime database. [chars] describes the runtime database which the process tried to restore and
0x[hex] is the system err code.
Recommended Action No action is required.
FDMI-3
Error Message FDMI-3-BAD_FRAME: Malformed frame received: [chars]
Explanation FDMI process received malformed frame. [chars] describes the malformation.
Recommended Action No action is required.
Error Message FDMI-3-BAD_RESPONSE: response with command code: [hex]
Explanation FDMI process received bad payload in response.
Recommended Action No action is required.
Error Message FDMI-3-INTERNAL_ERROR: Internal err: [chars]
Explanation FDMI process encountered a generalerror thatdoes not fall in any of the categories.
[chars] describes the error and its context.
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General
