Send document comments to nexus7k-feedback-doc@cisco.com
2-197
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
FCDOMAIN Messages
Error Message FCDOMAIN-3-PORT_SUSPENDED: Response (Cmd Code [hex]) for SWILS [hex]
intended for [chars] is received on [chars]
Explanation An FC2 response frame (Command Code [hex]) for SWILS [hex] that was intended for
the interface [chars] has been received on [chars] instead.
Recommended Action Check the configuration of both interfaces on the local switch and the
interfaces on the other side of their corresponding links. In particular, check whether they should all
belong to the same port channel.
Error Message FCDOMAIN-3-SDWRAPBIND_FAILED: Bind to debug server failed
Explanation Fcdomain feature has not been able to contact the debug service. Any problems
occurring in the fcdomain feature will not be logged.
Recommended Action No action is required.
Error Message FCDOMAIN-3-SDWRAPHISTINIT_FAILED: Initialization of history message
list failed.
Explanation Fcdomain feature has not been able to contact the debug history service. Any problems
occurring in the fcdomain feature will not be logged to this debug history.
Recommended Action No action is required.
Error Message FCDOMAIN-3-VSAN_MERGE_DETECTED: Merge detected with VSAN [dec]
(Common Fabric Name [chars])
Explanation The local VSAN and VSAN [dec] have the same principal switch [chars], therefore are
connected in the same logical fabric.
Recommended Action No action is required.
FCDOMAIN-4
Error Message FCDOMAIN-4-DM_ALLOWED_DM_LIST_MOD_ON_SUBORDINATE: Allowed domain
list for vsan [dec] modified on subordinate switch with fcdomain distribution
enabled
Explanation When distRIBution is enabled, it is recommended to modify the allow domain list on
the principal switch only.
Recommended Action Abort the current session on the local switch and start a new one on the
principal switch.
To Next Page
Loading...
Need help?
General
