Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-305
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IPV6 Messages
Error Message IPv6-3-IPV6_MSG_TO_TLV Format: TLV Conversion failed (%d)
Explanation TLV conversion failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IPv6-3-IPV6_MTS_DROP Format: Error returned from mts_drop(), errno:
%s
Explanation IPv6 called an MTS API which returned an error.
Recommended Action Dump core, and and and then restart component.
Error Message IPv6-3-IPV6_MTS_RECV Format: Error returned from mts_recv(), errno:
%s
Explanation IPv6 called an MTS API which returned an error.
Recommended Action Dump core, and and and then restart component.
Error Message IPv6-3-IPV6_MTS_UNKNOWN_MSG Format: Received unknown MTS message with
opcde %d, dropping it
Explanation IPv6 received an unknown message. The message is dropped.
Recommended Action No action is required.
Error Message IPv6-3-IPV6_MV_INIT Format: Couldn't init mutex %s
Explanation IPv6 process has failed to initialize the mutex system resource.
Parameters: Thread Name ...
Recommended Action Dump core, and then restart component.
Error Message IPv6-3-IPV6_TLV_TO_STRUCT Format: TLV to Struct Conversion failed
(%d)
Explanation TLV to Struct conversion failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IPv6-3-IPV6_TXLIST_CREATE Format: Couldn't create txlist for %s
Explanation IPv6 has failed to create a txlist resource.
Parameters: Data type ...
Recommended Action Dump core, and then restart component.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English