Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-325
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ISIS Messages
Error Message ISIS-4-REDIST_MAX_ROUTE Format: Redistribution route limit has been
reached - %d routes
Explanation The system has detected an ISIS redistRIBution: Max limit has been reached
Parameters: Number of routes ...
Recommended Action No action is required.
Error Message ISIS-4-REDIST_THR_ROUTE Format: Redistribution threshold has been
reached - %d routes
Explanation The system has detected an ISIS redisTRIBution: Threshold limit has been reached
Parameters: Number of routes ...
Recommended Action No action is required.
Error Message ISIS-4-SEQWRAP Format: Sequence number wraparound event detected
Explanation IS-IS has detected that an LSP's sequence number has wrapped. IS-IS will shut down
and restart.
Recommended Action No action is required.
ISIS-5
Error Message ISIS-5-ADJCHANGE Format: %s adj L%s %s over %s - %s
Explanation The indicated adjacency has changed its state.
Parameters: Interface Type, Level, The system ID, Interface Name, Reason ...
Recommended Action No action is required.
Error Message ISIS-5-PROC_SEQWRAP Format: Handle sequence number wraparound -
disabling process for %d secs
Explanation An LSP's sequence number has wrapped, and the process will be disabled for the
correct length of time.
Parameters: Time ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English