Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-333
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IVR Messages
Error Message IVR-3-CLEAR_FAILED: [chars]
Explanation An error has occurred while clearing the lock. The reason for the failure : [chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IVR-3-COMMIT_FAILED: [chars]
Explanation An error has occurred while committing configuration. The reason for the failure :
[chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IVR-3-COMMIT_PARTIALLY_FAILED: [chars]
Explanation An error has occurred while committing configuration. Configuration could not be
committed on some switches. The reason for the failure : [chars]. Configuration can be inconsistent
in the fabric.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IVR-3-COMMIT_REJECTED: [chars]
Explanation Commit request received from remote switch is rejected. The reason for the failure:
[chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IVR-3-DDAS_LOCK_TIMER_EXPIRED: IVR database lock is released, as
device-alias commit/abort notification is not received in the expected time frame.
Explanation When device-alias sends the validation request, IVR database is locked and a timer is
started. For any reason, if device-alias commit/abort notification is not received within the expected
time frame, the lock timer gets expired and the lock is released. If device-alias commmit notification
is received after the lock is released, the changes are not applied and this could cause inconsistency
between IVR and device-alias.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English