Send document comments to nexus7k-feedback-doc@cisco.com
2-337
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
IVR Messages
Error Message IVR-3-MERGE_FAILED: reason is [chars]
Explanation An error has occurred while merging the configuration. The reason for the failure :
[chars].
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message IVR-3-MTS_ERROR: MTS message transmission failed with error [dec]
Explanation IVR process unsuccessfully tried to send an MTS message. MTS error number is
specified in [dec].
Recommended Action No action is required.
Error Message IVR-3-NS_ERROR: FCNS API, [chars], failed with error [hex]
Explanation IVR invoked FCNS API and received the error code. [chars] describes the API and
0x[hex] specifies the error.
Recommended Action No action is required.
Error Message IVR-3-PSS_CFG_RESTORE_ERROR: Configuration restoration for [chars]
failed with error [hex]
Explanation IVR read the saved configuration and has detected an error while rebuilding the runtime
configuration. [chars] describes the configuration which the process tried to restore and 0x[hex] is
the system err code.
Recommended Action No action is required.
Error Message IVR-3-PSS_ERROR: PSS operation [chars] returned error: [hex]
Explanation [chars] specifies the context where the failure occurred and 0x[hex] specifies the error.
Recommended Action No action is required.
Error Message IVR-3-PSS_RTDB_RESTORE_ERROR: Runtime database restoration for
[chars] failed with error [hex]
Explanation IVR read the saved runtime database and has detected an error while rebuilding the
runtime database. [chars] describes the runtime database which the process tried to restore and
0x[hex] is the system error code.
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General
