Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-375
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
M6RIB Messages
M6RIB-2
Error Message M6RIB-2-API_INIT_SEM Format: Failed to init the client API semaphore:
%s, create: %s
Explanation M6RIB could not create the semaphore that protects access to the shared memory
between M6RIB and its clients.
Parameters: Operation, Error from the operation ...
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message M6RIB-2-RES_MGR Format: Error returned from %s, errno: 0x%08x (%s) in
%s()
Explanation The resource manager returned an error to M6RIB, while M6RIB was performing an
action relating to its shared memory
Parameters: RM Function, Error Code, Error Description, Calling Function ...
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message M6RIB-2-STARTUP_FAILURE Format: Startup failure: %s
Explanation An unrecoverable software error has occurred during M6RIB startup.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
M6RIB-3
Error Message M6RIB-3-ACTIVE_TIMER_FAILED Format: active_timer_create() failed for
m6rib_main()
Explanation The M6RIB process has failed to create a timer.
Recommended Action Dump core, then reload the stack.
Error Message M6RIB-3-API_FAILED Format: %s failed
Explanation The M6RIB process has failed in invoking an API.
Parameters: Function ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English