Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-377
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
M6RIB Messages
Error Message M6RIB-3-INIT_SDB Format: %s Return Code: 0x%x Error String: %s
Explanation SDB initialization has failed
Parameters: Message Return Code Error String ...
Recommended Action No action is required.
Error Message M6RIB-3-KSINK_LIB_ERROR Format: %s %s
Explanation A error was encountered during ksink operations.
Parameters: Error Description, M6RIB Function ...
Recommended Action No action is required.
Error Message M6RIB-3-LIB_API_FAILED Format: %s failed in %s
Explanation Process failed in invoking an M6RIB API.
Parameters: API Call, Function ...
Recommended Action No action is required.
Error Message M6RIB-3-LIB_DUP_REGISTER Format: m6rib_register(): duplicate register
by \%s\
Explanation Dupilcate registration request to the M6RIB process, igored.
Parameters: PIB Name ...
Recommended Action No action is required.
Error Message M6RIB-3-LIB_MTS_FAILED Format: %s failed in %s, errno: %s, for %s
Explanation Failure in M6RIB library to access mts-queue
Parameters: MTS Operation, Function, errorno, MTS Queue ...
Recommended Action No action is required.
Error Message M6RIB-3-LIB_SEM_INVALID Format: %s:%d: semaphore invalid in %s
Explanation M6RIB semaphore was found to be invalid when performing a semaphore operation
Parameters: Function Name, Line ...
Recommended Action No action is required.
Error Message M6RIB-3-LIB_SEM_OP Format: %s:%d: semaphore operation %s failed
Explanation Caller failed to perform an operation on the M6RIB semaphore
Parameters: Function Name, Line ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English