Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-454
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
PIM Messages
Error Message PIM-3-TIMER_SET_INIT Format: Couldn't init %s active timer set
Explanation PIM failed to initialize timer resource.
Parameters: Timer Name ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-TIMER_START Format: Couldn't start %s timer
Explanation PIM failed to initialize timer resource.
Parameters: Timer Name ...
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-UDP_READ Format: Error reading UDP socket
Explanation UDP Socket Error.
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-UDP_SENDTO Format: udp_sendto() on %s failed: %s
Explanation PIM failed to send over UDP socket.
Parameters: Message String Error String ...
Recommended Action No action is required.
Error Message PIM-3-URIB_CONTEXT Format: Couldn't get URIB VRF %s
Explanation PIM failed to obtain unicast routing VRF from URIB.
Recommended Action Dump core, and and and then restart component.
Error Message PIM-3-WRLOCK_ASSERT Format: %s:%d: Assert, write-lock not acquired
Explanation Caller Failed to get PIM Shared Memory write lock
Parameters: Function Name, Line ...
Recommended Action No action is required.
PIM-5
Error Message PIM-5-DR_CHANGE Format: DR change from %s to %s on interface %s
Explanation PIM Designated router changed on the interface.
Parameters: Old DR address, New DR address, Interface ...
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English