Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-592
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SDV Messages
Error Message SDV-3-LOCK_FAILED: [chars]
Explanation An error has occurred while acquiring the lock. The reason for the failure : [chars].
Recommended Action No action is required.
Error Message SDV-3-MERGE_ACTIVATION_FAILED: [chars]
Explanation Error while activating the merged SDV database due to [chars].
Recommended Action No action is required.
Error Message SDV-3-MERGE_CAP_FAILED: [chars]
Explanation SDV fabric merge failed because of incomaptible capabilities [chars].
Recommended Action Compare SDV configuration in both fabrics and resolve the conflicts if any
and commit the changes.
Error Message SDV-3-MERGE_FAILED: [chars]
Explanation SDV fabric merge failed due to [chars].
Recommended Action Check the error using show sdv merge status VSAN <VSAN-id> command.
Compare SDV configuration in both fabrics and resolve the conflicts if any and commit the changes.
Error Message SDV-3-MTS_ERR: [chars]
Explanation The SDM process encountered an MTS error due to [chars].
Recommended Action No action is required.
SDV-4
Error Message SDV-4-FCID_REWRITE_REQUEST_TO_ACL_FAILED_AND_RETRYING:
failed:[chars]. Retrying the request again.
Explanation This happens when either any of the line cards being upgraded or ACL experienced
error while processing the request.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English