Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-616
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SPAN Messages
SPAN-2
Error Message SPAN-2-MEM_FULL: Memory allocation failed
Explanation Memory allocation failed.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
SPAN-3
Error Message SPAN-3-IPC_FAIL: IPC Error
Explanation Internal IPC error.
Recommended Action No action is required.
Error Message SPAN-3-SYSINFO_TIMEOUT: Span timed out waiting for response from port
manager for sys info
Explanation Span request for critical system information from port manager timed out. So, span on
the new active is exiting and system manager will restart Span.
Recommended Action No action is required.
SPAN-5
Error Message SPAN-5-ATL_VSAN_DEFAULT_ALL: Default to all VSANs for SPAN egress
session
Explanation Generation 2 fabric switches support only one VSAN filter for egress SPAN session. If
no or more than one VSANs are specified, SPAN will default to use all VSANs for the egress SPAN
session.
Recommended Action No action is required.
Error Message SPAN-5-SPAN_CFG_REJECT_SRC_VSAN_FILTER_NOT_SUPPORTED: Source
interface [[chars]] in dir [[chars]] removed from session [[dec]].
Explanation Interface level VSAN filters are not supported.
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English