Send document comments to nexus7k-feedback-doc@cisco.com
2-676
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSMGR Messages
Error Message SYSMGR-2-CFGWRITE_TIMEOUT_ABORT: Configuration copy aborted by
timeout.
Explanation A service failed to store its configuration in the timeout period. The operation has been
aborted.
Recommended Action No action is required.
Error Message SYSMGR-2-CFGWRITE_USER_ABORT: Configuration copy aborted by the user.
Explanation The user typed CTRL+C while the configuration was being saved, and the operation
has been aborted.
Recommended Action No action is required.
Error Message SYSMGR-2-CONVERT_FUNC_FAILED: Conversion function failed for service
[chars] (error-id [hex]).
Explanation This message indicates that the conversion function failed for this service.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message SYSMGR-2-CONVERT_FUNC_NOTFOUND: Conversion function not found for
service [chars].
Explanation This message indicates that the system could not find appropriate conversion function
for this service.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message SYSMGR-2-CONVERT_LIB_NOTFOUND: Conversion library not found for
service [chars].
Explanation This message indicates that the system could not find conversion library for this
service.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message SYSMGR-2-CONVERT_STARTUP_ABORTED: Conversion of startup-config
failed.
Explanation This message indicates that the conversion of startup configuration was aborted.
Recommended Action If the problem persists, please use the vshboot command 'init system' to
initialize the configuration partition.
To Next Page
Loading...
Need help?
General
