Send document comments to nexus7k-feedback-doc@cisco.com
2-706
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSMGR Messages
Error Message SYSMGR-3-URIFS_APPLY_FAILED: Applying URI filesystem database failed
(error-id [hex]).
Explanation The application of URI file system database has failed. [dec] is the error-ID
representing the failure reason.
Recommended Action No action is required.
SYSMGR-4
Error Message SYSMGR-4-CFGWRITE_PARTIALFORCED: Some services are missing; partial
configuration write forced.
Explanation The system is not fully operational, but a configuration copy has been forced. The
services that are not running will not save their configuration, and the next time they will restart with
a default configuration.
Recommended Action Use the 'show process' command to find out which required services are not
running.
Error Message SYSMGR-4-ON_DEMAND_STOP: On-demand service [chars] stopped.
Explanation The service start type is specified as type on-demand in its configuration file and an
external request requested to abort it.
Recommended Action No action is required.
Error Message SYSMGR-4-ON_DEMAND_STOP_UID_KNOWN: On-demand service [chars] stopped
by uid ([dec]).
Explanation The service start type is specified as type on-demand in its configuration file and an
external request requested to abort it.
Recommended Action No action is required.
Error Message SYSMGR-4-PARSEWARN_INVALID_CFGFILE: [chars]: unable to find [chars]:
[chars] ([dec]).
Explanation This message is for Cisco TAC debugging. This is not a problem or malfunction.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
To Next Page
Loading...
Need help?
General
