Send document comments to nexus7k-feedback-doc@cisco.com
2-725
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSTEMHEALTH Messages
Error Message SYSTEMHEALTH-4-OHMS_SVC_DAEMON_FAILED: System Health process running
on module [dec] SVC node [dec] exited due to errors.
Explanation OHMS SVC daemon exited.
Recommended Action No action is required.
Error Message SYSTEMHEALTH-4-OHMS_TCAM_PARITY_ACL_FIB_TIMEOUT: TCAM test timeout
waiting for ACL/FIB to update TCAM on module [dec]
Explanation The system health TCAM test timeout occurred while waiting for response from
ACL/FIB.
Recommended Action If significannot packet drops are encountered in the forwarding engine, please
schedule a downtime and reload the module.
Error Message SYSTEMHEALTH-4-OHMS_TCAM_PARITY_ACL_FIB_UPDATE_FAILING: Tcam test
failed as ACL/FIB failed to update TCAM on module [dec]
Explanation ACL/FIB failed to update TCAM after soft parity errors were encountered.
Recommended Action If significannot packet drops are encountered in the forwarding engine, please
schedule a downtime and reload the module.
Error Message SYSTEMHEALTH-4-OHMS_TCAM_PARITY_ERRORS: TCAM test on module [dec] has
been suspended due to internal errors.
Explanation TCAM test internal errors.
Recommended Action No action is required.
SYSTEMHEALTH-5
Error Message SYSTEMHEALTH-5-OHMS_BATTERY_FAILING: Battery [dec] starting to fail
on module [dec]. Reason: [chars].
Explanation The system Health battery failing.
Recommended Action No action is required.
Error Message SYSTEMHEALTH-5-OHMS_BOOTFLASH_FAILING: Bootflash starting to fail on
module [dec].
Explanation The system Health bootflash failing.
Recommended Action No action is required.