Send document comments to nexus7k-feedback-doc@cisco.com
2-727
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
SYSTEMHEALTH Messages
Error Message SYSTEMHEALTH-5-OHMS_TCAM_PARITY_CLEARED: Failing conditions for TCAM
on module [dec] have been cleared.
Explanation The system Health TCAM failures cleared.
Recommended Action No action is required.
Error Message SYSTEMHEALTH-5-OHMS_TCAM_PARITY_FAILING: TCAM starting to fail on
module [dec].
Explanation The system Health TCAM failing.
Recommended Action No action is required.
Error Message SYSTEMHEALTH-5-OHMS_TEST_FAILING: [chars] test starting to fail on
module [dec].
Explanation The system Health test failing.
Recommended Action No action is required.
SYSTEMHEALTH-6
Error Message SYSTEMHEALTH-6-OHMS_ASIC_FAILURE_INFO: Module [dec] Asic [chars]
instance [dec] probable cause of failure.
Explanation HW failure analysis findings.
Recommended Action No action is required.
Error Message SYSTEMHEALTH-6-OHMS_BATTERY_CLEARED: Failing conditions for battery
[dec] on module [dec] have been cleared.
Explanation The system Health battery failure cleared.
Recommended Action No action is required.
Error Message SYSTEMHEALTH-6-OHMS_BOOTFLASH_CLEARED: Failing conditions for
bootflash on module [dec] have been cleared.
Explanation The system Health bootflash failures cleared.
Recommended Action No action is required.
To Next Page
Loading...
