Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-738
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
TCP Messages
Error Message TCP-3-TCP_MTS_RECV Format: %s: mts_recv() failed on %s queue: %s
Explanation TCP called an MTS API which returned an error.
Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects
all VDCs on the system.
Error Message TCP-3-TCP_STRUCT_TO_TLV Format: Structure to TLV failed, errno: %s
Explanation TLV conversion failed.
Recommended Action No action is required.
Error Message TCP-3-TCP_TLV_TO_STRUCT Format: Structure to TLV failed, errno: %s
Explanation TLV conversion failed.
Recommended Action No action is required.
Error Message TCP-3-TIMER_CANCEL Format: %s: Timer cancel failed for %s
Explanation No system resources.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message TCP-3-TIMER_CREATE Format: %s: Timer create failed for %s
Explanation No system resources.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message TCP-3-TIMER_INIT Format: %s: Timer init failed
Explanation No system resources.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.
Error Message TCP-3-TIMER_START Format: %s: Timer start failed for %s
Explanation No system resources.
Recommended Action Use the 'restart' command to restart the feature and clear this problem.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English