Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Send document comments to nexus7k-feedback-doc@cisco.com
2-847
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ZONE Messages
Error Message ZONE-6-LZ_SWITCHOVER: LUN/Read-only zoning process switching over to
other supervisor.
Explanation The LUN/Read-only zoning process has successfully switched over to the standby
supervisor module.
Recommended Action No action is required.
Error Message ZONE-6-ZS_CHANGE_ACA_REJECTED: ACA received from remote domain [dec]
is rejected
Explanation Received invalid ACA from domain [dec]. Either the domain list do not match OR
authorization has already been acquired by another switch.
Recommended Action Verify the interoperability mode on the switch.
Error Message ZONE-6-ZS_FC2_OPER_INFO: FC2 [chars] operation failed : [chars]
Explanation Zone Server FC2 [chars] operation failed : [chars].
Recommended Action No action is required.
Error Message ZONE-6-ZS_INIT_PROCESS: Zone Server process started [chars] at
[chars]
Explanation Zone Server process started in [chars] (stateless/stateful) mode at time [chars].
Recommended Action No action is required.
Error Message ZONE-6-ZS_INIT_WARNING: [chars]
Explanation Warning during Zone Server Initialization: [chars].
Recommended Action No action is required.
Error Message ZONE-6-ZS_INVALID_MEMBER: Invalid member [dec] [chars]
Explanation Invalid member type [dec] [chars] received from the API call.
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Error Message ZONE-6-ZS_UNKNOWN_LIC_FEATURE: [chars]
Explanation Zone Server received an event for a known licensing feature: [chars].
Recommended Action No action is required.

Cisco AP775A - Nexus Converged Network Switch 5010 Specifications

General

Brand	Cisco
Model	AP775A - Nexus Converged Network Switch 5010
Category	Switch
Language	English