164 Ethernet Configuration Commands
The displayed port status information includes the following:
•
Port
— The port number.
•
Description
— If the port has a description, the description is displayed.
•
Port Type
— The port designated IEEE shorthand identifier. For example, 1000Base-T refers to 1000
Mbps baseband signaling.
•
Duplex
— Displays the port Duplex status.
•
Speed
— Refers to the port speed.
•
Neg
— Describes the Auto-negotiation status.
•
Flow Control
— Displays the Flow Control status.
•
Back Pressure —
Displays the Back Pressure status.
•
Link State
— Displays the Link Aggregation status.
Ch Type Duplex Speed Neg Flow
Control
Link State
--- ---- ----- --- ----- -------
ch1 -- -- -- -- -- Not Present
ch2 -- -- -- -- -- Not Present
ch3 -- -- -- -- -- Not Present
ch4 -- -- -- -- -- Not Present
ch5 -- -- -- -- -- Not Present
ch6 -- -- -- -- -- Not Present
ch7 -- -- -- -- -- Not Present
ch8 -- -- -- -- -- Not Present
console#
5400_CLI.book Page 164 Wednesday, December 17, 2008 4:33 PM