LLDP Commands 267
Example
The following example displays the Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery
(MED) configuration.
Switch# show lldp med configuration
Network policy 1
-------------------
Application type: Voice
VLAN ID: 2 tagged
Layer 2 priority: 0
DSCP: 0
Port Capabilities Network Policy Location PoE
---------- ---------- ---------- -------- ----
g1 Yes Yes: 1 Yes Yes
g2 Yes Yes: 1 Yes Yes
g3 Yes No No Yes
Switch# show lldp med configuration ethernet g1
Port Capabilities Network Policy Location PoE
---------- ---------- ---------- -------- ----
g1 Yes Yes: 1 Yes Yes
5400_CLI.book Page 267 Wednesday, December 17, 2008 4:33 PM