SSH Commands 383
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays the SSH server configuration.
The following table describes the significant fields shown in the display:
Console# show ip ssh
SSH server enabled. Port: 22
RSA key was generated.
DSA (DSS) key was generated.
SSH Public Key Authentication is enabled.
Active incoming sessions:
IP address SSH
username
Version Cipher Auth Code
---------- ---------- --------- ------- ----------
172.16.0.1 John Brown 2.0 3 DES HMAC-SH1
Field Description
IP address Client address
SSH username User name
Version SSH version number
Cipher Encryption type (3DES, Blowfish, RC4)
Auth Code Authentication Code (HMAC-MD5, HMAC-SHA1)
5400_CLI.book Page 383 Wednesday, December 17, 2008 4:33 PM
To Next Page
Loading...
