EasyManua.ls Logo

MCE iControl - Page 292

Default Icon
806 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
6-18 Manual # 42-02-7223
Car delayed with doors stalled, CAR DEL DOORS STALLED
Description: Indicates that a car, with doors stalled, has been delayed in reaching an assigned destination.
Car Reaction: Assigned hall calls will be reassigned to other available cars.
Troubleshooting:
1. Determine what is inhibiting the doors from closing.
2. Check the event log for any faults that may have prevented the doors from closing.
Car delayed with unknown door position, CAR DEL DOORS UNKNOWN
Description: Indicates that a car, with unknown door position, has been delayed in reaching an assigned des-
tination.
Car Reaction: Assigned hall calls will be reassigned to other available cars.
Troubleshooting:
1. Determine what is causing the doors to be reported in an invalid condition.
Car Dispatch Load. Not currently used.
Car Door Bypass, CAR DOOR BYPASS
Description: The Car Door Bypass switch on the iBox is in the Bypass position. (View-only on iView Safety
screen, enabled/disabled by MCE according to safety jurisdiction.)
Car Reaction: The car is placed in Inspection mode. To move the car, you must place it in either cartop or car
panel inspection mode. No other modes of operation are allowed.
Car Heavy Load Activated - Hall Calls Bypassed, CAR HEAVY LOAD
Description: The load in the car has exceeded the Heavy Load Threshold setting.
Car Reaction: Hall calls are bypassed until the heavy load condition is cleared. Hall calls assigned to this car
are reassigned to other cars if possible.
Troubleshooting: (If displayed in error)
1. Verify the programmed “Heavy Load Threshold” value and adjust if needed (Load Weigher Configuration
screen).
2. Evaluate whether or not the load in the car exceeds the Heavy Load Threshold. Calibrate the load
weigher if needed.
3. For discrete input load weighers, check the Heavy Load Input shown on the job prints.
Car Heavy Load - Deactivated
Car out of service with doors closed, CAR OS DOORS CLOSED
Description: A delayed car with closed doors has remained so for an excessive period of time (as determined
by a user-programmed timer parameter, Car Operation Screen/Passenger tab.
Car Reaction: The car removes itself from car and hall call service (car calls are canceled and hall calls are
canceled or reassigned).
Troubleshooting:
1. Determine what is inhibiting the car from reaching its destination.
2. Check the event log for any faults that may have prevented the car from moving.
Car out of service with doors closing, CAR OS DOORS CLOSING
Description: A delayed car with closing doors has remained so for an excessive period of time (as determined
by a user-programmed timer parameter, Car Operation Screen/Passenger tab.
Car Reaction: The car removes itself from car and hall call service (car calls are canceled and hall calls are
canceled or reassigned).
Troubleshooting:
1. Determine what is inhibiting the car from reaching its destination.
2. Check the event log for any faults that may have prevented the car from moving.
Table 6.3 iControl Messages
iControl Messages

Table of Contents