MCE iControl User Manual

iView - System View
10-64 Manual # 42-02-7223
•General outputs
• General - Attendant service output: Active when the specified car is on Attendant Ser-
vice operation. Select Car ID in Association column.
• General - Fire service phase I output: Active during Fire Recall Phase I. Association
column is blank.
• Manual configuration inputs
• Manual config - Hall call configuration input: Selects the Hall call eligibility configura-
tion (1 - 8) designated in the Association column to be the currently active configura-
tion.
• Manual config - Parking configuration input: Selects the Parking configuration (1 - 8)
designated in the Association column to be the currently active configuration.
• Manual config - Parking eligibility configuration input: Selects the Parking eligibility
configuration (1 - 8) designated in the Association column to be the currently active
configuration.
• Manual config - Mode of operation configuration input: Selects the Mode of operation
configuration (1 - 8) designated in the Association column to be the currently active
configuration.
• Manual config - Security configuration input: Selects the Security configuration (1 - 8)
designated in the Association column to be the currently active configuration.
• Manual config - ETA engine input: Forces iCentral to use the Estimated Time of
Arrival (ETA) dispatching engine as the active dispatcher type. ETA has higher priority
if the ETA and DBD engine inputs are both active.
• Manual config - DBD engine input: Forces iCentral to use the Destination Based Dis-
patching (DBD) engine as the active dispatcher type. ETA has higher priority if the
ETA and DBD engine inputs are both active.
• Active configuration outputs
• Active config - Hall call eligibility output: Indicates that the Hall call eligibility configu-
ration (1 - 8) designated in the Association column is the currently active configura-
tion.
• Active config - Parking output: Indicates that the Parking configuration (1 - 8) desig-
nated in the Association column is the currently active configuration.
• Active config - Parking eligibility output: Indicates that the Parking eligibility configu-
ration (1 - 8) designated in the Association column is the currently active configura-
tion.
• Active config - Mode of operation output: Indicates that the Mode of operation config-
uration (1 - 8) designated in the Association column is the currently active configura-
tion.
• Active config - Security output: Indicates that the Security configuration (1 - 8) desig-
nated in the Association column is the currently active configuration.
• Active config - ETA engine output: Indicates that the Estimated Time of Arrival (ETA)
dispatching engine is now the active dispatcher type.
• Active config - DBD engine output: Indicates that the Destination Based Dispatching
(DBD) engine is now the active dispatcher type.

MCE iControl Specifications

General

Brand	MCE
Model	iControl
Category	Controller
Language	English