NETGEAR ProSAFE M7100-24X - Clock Summer-Time Date

Utility Commands
554
ProSafe Managed Switch
• hh:mm—Time in 24-hour format in hours and minutes. (Range: hh:0-23, mm: 0-59)
• offset—Number of minutes to add during the summertime. (Range:1-1440)
• acronym—The acronym for the time zone to be displayed when summertime is in effect.
(Range: Up to four characters)
For example:
(Switch)(Config)# clock summer-time recurring 1 sun jan
00:10 2 mon mar 10:00 offset 1 zone ABC
clock summer-time date
Use the clock summer-time date command to set the summertime offset to UTC. If the
optional parameters are not specified, they are read as either '0' or '\0', as appropriate.
• date—Day of the month. (Range: 1-31)
• month—Month. (Range: The first three letters by name; jan, for example.)
• year—Year. (Range: 2000-2097)
• hh:mm—Time in 24-hour format in hours and minutes. (Range: hh: 0-23, mm: 0-59)
• offset—Number of minutes to add during the summertime. (Range:1-1440)
• acronym—The acronym for the time zone to be displayed whensummertime is in effect.
(Range: Up to four characters)
For example:
(Switch)(config)# clock summer-time date 1 Apr 2007
02:00 28 Oct 2007 offset 90 zone EST
or
(Switch) (config)# clock summer-time date Apr 1 2007
02:00 Oct 28 2007 offset 90 zone EST
Format clock summer-time recurring {USA | EU | {week day month hh:mm week
day month hh:mm}} [offset offset ] [zone acronym]
Mode Global Config
Format clock summer-time date {date | month} {month | date} year hh:mm
{date| month} {month | date} year hh:mm [offset offset ] [zone
acronym]
Mode Global Config