Utility Commands
581
ProSafe Managed Switch
no debug igmpsnooping receive
This command disables tracing of received IGMP Snooping packets.
Format no debug igmpsnooping receive
Mode
debug ip acl
Use this command to enable debug of IP Protocol packets matching the ACL criteria.
Default
Format debug ip acl <acl Number>
Mode
no debug ip acl
Use this command to disable debug of IP Protocol packets matching the ACL criteria.
Format no debug ip acl <acl Number>
Mode
debug ip dvmrp packet
Use this command to trace DVMRP packet reception and transmission. receive traces only
received DVMRP packets and transmit traces only transmitted DVMRP packets. When
neither keyword is used in the command, then all DVMRP packet traces are dumped. Vital
Src_Mac
Source MAC address of the packet.
Dest_Mac
Destination multicast MAC address of the packet.
Src_IP
The source IP address in the ip header in the packet.
Dest_IP
The destination multicast ip address in the packet.
Type
The type of IGMP packet. Type can be one of the following:
• Membership_Query – IGMP Membership Query
• V1_Membership_Report – IGMP Version 1 Membership Report
• V2_Membership_Report – IGMP Version 2 Membership Report
• V3_Membership_Report – IGMP Version 3 Membership Report
• V2_Leave_Group – IGMP Version 2 Leave Group
Group
Multicast group address in the IGMP header.
Privileged EXEC
disabled
Privileged EXEC
Privileged EXEC
Parameter Definition
To Next Page
Loading...
Need help?
General