Switching Commands
162
ProSafe Managed Switch
no set mld mrouter
Use this command to disable multicast router attached mode for a VLAN with a particular
VLAN ID.
Format no set mld mrouter vlanid
Mode
set mld mrouter interface
Use this command to configure the interface as a multicast router-attached interface. When
configured as a multicast router interface, the interface is treated as a multicast
router-attached interface in all VLANs.
Default
Format set mld mrouter interface
Mode
no set mld mrouter interface
Use this command to disable the status of the interface as a statically configured multicast
router-attached interface.
Format no set mld mrouter interface
Mode
show mldsnooping
Use this command to display MLD Snooping information. Configured information is displayed
whether or not MLD Snooping is enabled.
Format show mldsnooping [unit/slot/port | vlanid]
Mode
When the optional arguments unit/slot/port or vlanid are not used, the command
displays the following information.
Interface Config
disabled
Interface Config
Interface Config
Privileged EXEC
Term Definition
Admin Mode
Indicates whether or not MLD Snooping is active on the switch.
Interfaces
Enabled for
MLD Snooping
Interfaces on which MLD Snooping is enabled.
To Next Page
Loading...
Need help?
General