NETGEAR ProSAFE M7100-24X - Port-Security Max-Dynamic; Port-Security Max-Static; Port-Security Mac-Address

Switching Commands
169
ProSafe Managed Switch
port-security max-dynamic
This command sets the maximum number of dynamically locked MAC addresses allowed on
a specific port.
Default
Format port-security max-dynamic
<maxvalue>
Mode
no port-security max-dynamic
This command resets the maximum number of dynamically locked MAC addresses allowed
on a specific port to its default value.
Format no port-security max-dynamic
Mode
port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed on a
port
.
Default
Format port-security max-static
<maxvalue>
Mode
no port-security max-static
This command sets maximum number of statically locked MAC addresses to the default
value.
Format no port-security max-static
Mode
port-security mac-address
This command adds a MAC address to the list of statically locked MAC addresses. The
<vid> is the VLAN ID.
Format port-security mac-address <mac-address> <vid>
Mode
600
Interface Config
Interface Config
20
Interface Config
Interface Config
Interface Config