Utility Commands
585
ProSafe Managed Switch
no debug ipv6 mcache packet
Use this command to disable debug tracing of MDATAv6 packet reception and transmission.
Format no debug ipv6 mcache packet [receive|transmit]
Mode
debug ipv6 mld packet
Use this command to trace MLDv6 packet reception and transmission. receive traces only
received MLDv6 packets and transmit traces only transmitted MLDv6 packets. When neither
keyword is used in the command, then all MLDv6 packet traces are dumped. Vital
information such as source address, destination address, control packet type, packet length,
and the interface on which the packet is received or transmitted is displayed on the console.
Default
Format debug ipv6 mld packet [receive|transmit]
Mode
no debug ipv6 mld packet
Use this command to disable debug tracing of MLDv6 packet reception and transmission.
Format no debug ipv6 mld packet [receive|transmit]
Mode
debug ipv6 pimdm packet
Use this command to trace PIMDMv6 packet reception and transmission. receive traces only
received PIMDMv6 packets and transmit traces only transmitted PIMDMv6 packets. When
neither keyword is used in the command, then all PIMDMv6 packet traces are dumped. Vital
information such as source address, destination address, control packet type, packet length,
and the interface on which the packet is received or transmitted is displayed on the console.
Default
Format debug ipv6 pimdm packet [receive|transmit]
Mode
no debug ipv6 pimdm packet
Use this command to disable debug tracing of PIMDMv6 packet reception and transmission.
debug ipv6 pimsm packet
Use this command to trace PIMSMv6 packet reception and transmission. receive traces only
received PIMSMv6 packets and transmit traces only transmitted PIMSMv6 packets. When
Privileged EXEC
disabled
Privileged EXEC
Privileged EXEC
disabled
Privileged EXEC
To Next Page
Loading...
Need help?
General