Utility Commands
601
ProSafe Managed Switch
show license
This command displays the license status.
License Date indicates the date of the license. License Status indicates whether license is
active or inactive.
Format show license
Mode
Example: The following shows example CLI display output for the command.
(Managed Switches) #show license
License date : Apr-9-2010
License copy : 1
License Status: Active
Description : License key is active.
(Managed Switches) #
show license features
This command displays the features that are licensed on the switch
Format show license features
Mode
Example: The following shows example CLI display output for the command.
(Managed Switches) #show license features
IGMP
MCAST
PIMDM
DVMRP
PIMSM
OSPFV3
IPV6
IP Address Conflict Commands
ip address-conflict-detect run
This command triggers the switch to run active address conflict detection by sending
gratuitous ARP packets for IPv4 addresses on the switch.
Privileged EXEC
Privileged EXEC
To Next Page
Loading...
Need help?
General